Welcome to Shenzhen Fanying Ultrasonic Technology Co., Ltd. Fanying ultrasonic, customized official website!
Location:Home > > News > > Common problem
Frequency and cleaning effect in ultrasound
  • Date: 2023-08-18
  • Number: 167
​leaning effect in a lower frequency range suitable for "general cleaning use" Cleaning in a lower frequency range, utilizing cavitation, has the following fea……
How to judge how to use ultrasonic cleaning machine to remove wax?
  • Date: 2022-11-23
  • Number: 616
How to judge how to use an ultrasonic cleaning machine to remove wax, must be clear about the efficacy of wax and cleaning requirements, although wax removal is not a major project, but it requires skills, the same higher requirements, for example, the pr
What is the difference between home ultrasonic cleaning machine and industrial ultrasonic cleaning machine?
  • Date: 2022-11-23
  • Number: 694
The advent of the ultrasonic cleaning machine has released people's long-term manual cleaning work, now in many different types of fields, there are various types of ultrasonic cleaning machine, the most representative is the home ultrasonic cleaning
The higher the power of the ultrasonic cleaner, the better?
  • Date: 2022-11-23
  • Number: 722
Ultrasonic cleaning machine is widely used in railway, automobile, aerospace, aviation, machinery, electronics, LCD manufacturing, optics, medical, electroplating, coating and vacuum coating industries. These so-called ultrasonic cleaning machine power is
How to clean the lab equipment?
  • Date: 2022-11-22
  • Number: 604
Common laboratory glassware such as measuring cups, test tubes, titrators, pipettes, measuring bottles and so on. Equipment in the use of the process will be stained with oil, scale, rust stains, and so on, after the use of not complete cleaning in a time
What should we consider when purchasing ultrasonic cleaner?
  • Date: 2022-11-22
  • Number: 528
When purchasing ultrasonic cleaning machine should pay attention to the following aspects 1. So choose ultrasonic cleaner output power is lower, even if it is long-term use, it will not completely remove stains. The selected output power is larger, alt
What are some common trouble problems of ultrasonic cleaning machine?
  • Date: 2022-11-21
  • Number: 465
The ultrasonic cleaning machine is a common cleaning equipment in the laboratory at this stage. It is convenient to use and can be cleaned thoroughly. It can be mainly used for a variety of workpieces and equipment, especially for some small, irregular an
What are the effects of Ultrasonic transducer?
  • Date: 2022-11-21
  • Number: 455
Ultrasonic is a kind of sound signal whose frequency is more than 20kHz. It has many advantages, such as great penetration depth, high resolution, good directivity and no harm from radiation, widely used in medical imaging diagnosis, medical treatment, no
How to prolong the service life of ultrasonic cleaning machine?
  • Date: 2022-11-19
  • Number: 414
The use of ultrasonic cleaning machine and operating procedures are closely combined, how to better use of ultrasonic cleaning equipment can extend its service life? First, the application of ultrasonic cleaning machine must be in accordance with t
What is the advantage of ultrasonic cleaning machine compared with general cleaning methods?
  • Date: 2022-11-19
  • Number: 351
In many cleaning modes, ultrasonic cleaning is the most efficient and practical one. The reason why ultrasonic cleaning can achieve this effect is related to its unique basic principles and cleaning methods. Ultrasonic cleaning is based on the unique&q
How much power does the ultrasonic cleaner need?
  • Date: 2022-11-19
  • Number: 513
What is a good ultrasonic cleaning machine? What frequency is best for ultrasonic cleaning or what some call ultrasonic cleaning? Ultrasonic cleaning is a process using appropriate cleaning agents and ultrasonic waves (usually 20-400 kHz) . The freq
How to select a cost-effective ultrasonic cleaning machine?
  • Date: 2022-11-19
  • Number: 334
Many instruments in the laboratory must be kept clean and dry in order to ensure the accuracy of the measurement value and ensure the instrument life. To this day, researchers in the lab have to“Brush the instrument” every time they finish the work, but n
« 1 2 3 4 5 6 7 8 »